Material condition modifiers define how geometric tolerances apply based on the size of a feature. They are critical for controlling fit, function, and assembly clearance.
1. Maximum Material Condition (MMC)
The condition where a feature contains the maximum amount of material.
- For a shaft → largest diameter
- For a hole → smallest diameter
Used to ensure worst-case assembly still works.
2. Least Material Condition (LMC)
The condition where a feature contains the least amount of material.
- For a shaft → smallest diameter
- For a hole → largest diameter
Used when minimum wall thickness or strength is critical.
3. Regardless of Feature Size (RFS)
The default condition where tolerance is independent of size.
- No bonus tolerance
- Geometry must meet tolerance at all sizes
Used when function requires strict geometric control.
4. Bonus Tolerance (Key Concept)
Bonus tolerance is additional geometric tolerance gained when a feature departs from MMC.
- Applies only with MMC (or LMC)
- More clearance = more allowable variation
Improves manufacturability without affecting assembly.
Simple Example
- Hole size: Ø10 ±0.1
- Position tolerance at MMC: Ø0.2
If the hole is produced at Ø10.1 (larger than MMC):
- Bonus = 0.1
- Total position tolerance = Ø0.3
MMC + Bonus tolerance is one of the most powerful tools in GD&T for balancing precision and cost
- Many engineers forget to use it → leading to overly tight and expensive designs
GD&T and Stack-Up: Basic to Expert Level
Learn Geometric Dimensioning and Tolerancing, tolerance stack-up analysis, and practical engineering drawing techniques.
View Course on Udemy →
Leave a Reply